+919405117673
Imatinib Tablets 100mg/400mg Wholesale Supply and Bulk Procurement in Nagpur

Bulk procurement begins with a clinically correct product specification, not a tablet count or a low quoted price. By the end, you will be able to compare 100 mg and 400 mg supply, qualify a Nagpur-based seller, review batch evidence, and assign every export and import document to the right party.

Key takeaways

  • State the disease indication and prescribed dose before requesting prices.
  • Specify imatinib base equivalent, salt form, pack size and product code.
  • Request batch documents, licence details and distribution-control evidence.
  • Assign export, import-duty and customs-clearance responsibilities in writing.

Match the strength and indication before requesting a quotation

Put the disease indication and prescribed dose in the purchase specification before you compare prices. State imatinib as the imatinib base equivalent, while also naming the salt form, dosage form, pack size and manufacturer’s product code.

StrengthProcurement meaningConfirm before ordering
100 mgSupports flexible dosing, including regimens requiring multiple tabletsTablet count per pack, total active amount and whether the approved label permits the required dose
400 mgReduces tablet count and shipping volume for a 400 mg regimenWhether one tablet matches the prescribed dose and whether the pack is approved in the destination market

Do not treat four 100 mg tablets as automatically interchangeable with one 400 mg tablet. Confirm the product label, tablet handling instructions, prescriber’s directions and local authorization before substituting strengths.

Name the intended use precisely. For Philadelphia chromosome-positive chronic myeloid leukaemia, identify disease phase and treatment line; for Philadelphia chromosome-positive acute lymphoblastic leukaemia, state the applicable protocol and combination therapy. If the order is for a KIT-positive gastrointestinal stromal tumour or dermatofibrosarcoma protuberans, record the biomarker and confirm that the destination market authorises that indication.

Your specification should therefore request either imatinib tablets 100mg or imatinib tablets 400mg against the approved regimen, not “imatinib” alone. Include tablets per carton, cartons per shipper, minimum order quantity, remaining shelf-life at dispatch and quotation validity so the quoted strength can be matched to actual use.

Define the wholesale specification and qualify the buyer-supplier transaction

A quotation is incomplete until it defines the product, transaction and evidence behind the shipment. Put every variable in writing; a Nagpur address does not establish authorization, stock status or export readiness.

1. State “imatinib 100 mg” or “imatinib 400 mg” as imatinib base equivalent, then identify the imatinib mesylate salt, tablet dosage form, manufacturer, product code and intended market. Record the pack size, tablets per carton, cartons per shipper and whether multiple 100 mg tablets are permitted by the approved label for the prescribed dose.

2. Confirm the commercial terms for wholesale supply: minimum order quantity, available batch, stock status, lead time, remaining shelf-life threshold at dispatch, quotation validity, currency, payment terms, Incoterm and transport responsibility. Do not infer these terms from a supplier’s location; write them into the purchase contract.

3. Request the supplier’s applicable wholesale drug licence and verify the licence holder, premises and covered activity through Maharashtra’s drug-control authority. For export, confirm the exporter identification number and customs capability; your side may need an import licence, product registration or import permit under destination-country law.

4. Qualify the buyer with the pharmaceutical import licence, wholesale distribution authorisation, destination registration details, institutional or prescribing credentials and consignee information. Before bulk procurement, obtain the batch certificate of analysis, batch release document, manufacturing and expiry dates, storage conditions and photographs or confirmation of intact original packaging.

Reject the order if the supplier cannot reconcile the licence, manufacturer, batch documents, pack configuration and contractual shelf-life commitment.

Verify the Nagpur supplier, batch documents and distribution controls

Do not treat a Nagpur address as proof that a Nagpur pharmaceutical supplier may wholesale prescription medicines. Request the supplier’s current wholesale drug licence, confirm the licence holder and premises, and verify with Maharashtra’s Food and Drug Administration that it covers pharmaceutical tablets and wholesale activity.

Check that the invoice entity, warehouse and bank beneficiary match the licensed business.

Ask for these batch and transaction records before approving the shipment:

  • Batch-specific certificate of analysis showing assay, dissolution, microbiological results where applicable, test methods, batch number, manufacturing date, expiry date and release status
  • GMP evidence identifying the manufacturing site, certificate scope and validity
  • Manufacturer, pack size, tablet count, shipper configuration and storage statement
  • Exporter Identification Number and the documents required for customs clearance
  • Warehouse receipt, dispatch record, transport details and any temperature-monitoring report

Cordium Pharmaceuticals Pvt Ltd, like any proposed source, should be evaluated through these documents rather than a catalogue claim or a generic “WHO-GMP” statement. GMP evidence supports manufacturing-system review; it does not prove registration, therapeutic equivalence or import approval in your destination market.

Require intact manufacturer cartons where possible. Breaking cartons to create mixed lots makes reconciliation and recall tracing harder. Record each batch from the manufacturing site through the Nagpur warehouse, freight forwarder and consignee.

Standard imatinib tablets are not normally refrigerated: protect them from heat, moisture, light and crushing, using 20–25°C controlled-room-temperature conditions and documenting excursions between 15–30°C.

Related product

Imat Tablets – Uses, Strengths, Benefits & Side Effects

Oncology Medicine

Imat Tablets – Uses, Strengths, Benefits & Side Effects

Imat Tablets – Product Overview Imat Tablets contain imatinib mesylate, a targeted anticancer medicine used under specialist supervision for certain...

View product →

Assign export documents, import duties and clearance responsibilities

A customs delay usually starts before packing: the importer has not confirmed that the 100 mg or 400 mg product is registered, licensed or covered by an import permit in the destination country. Confirm that status before the exporter books cargo, and agree the Incoterm so payment responsibility is unambiguous.

DocumentPrepared byVerified and paid by
Pro forma invoiceExporter, showing strength, quantity, price, currency and IncotermBuyer verifies; no customs duty is paid on it
Commercial invoiceExporter, with declared customs value, HS code, origin and consigneeBuyer and broker verify; importer pays assessed duty and taxes
Packing listExporter, listing cartons, tablet packs, net and gross weight and dimensionsBuyer verifies against the goods; exporter pays preparation costs
certificate of originExporter supplies origin data; an authorised chamber or issuing body certifies itImporter verifies preferential-duty eligibility and pays certification or processing fees
Certificate of analysis and batch-release documentsManufacturer or exporter, identifying batch, assay, dissolution, dates and storage conditionsBuyer’s quality team verifies before shipment; exporter pays unless the contract assigns the cost
Export customs filing and shipping billExporter or its customs broker, using the exporter identification numberExporter pays Indian filing and broker charges
Import permit, pharmaceutical import licence and customs entryImporter or its licensed brokerImporter verifies compliance and pays import duty, VAT or GST, inspection, storage and clearance charges

The buyer must send its licence, consignee details and permit instructions early. The exporter must check that invoice, packing list, batch documents and airway bill or bill of lading show the same product, quantity, batch and consignee. A mismatch can hold the entire shipment.

Close the order with a pre-shipment review and receiving plan

Before cargo leaves India, conduct a pre-shipment document review and confirm the receiving plan with the consignee.

1. Match the final invoice, packing list, purchase order and airway bill or bill of lading. Confirm imatinib strength, tablet count, carton count, batch number, manufacturing date, expiry date, agreed remaining shelf life, storage conditions and total active quantity.

2. Obtain the batch-specific certificate of analysis, batch-release evidence, applicable manufacturing authorisation, certificate of origin and export documentation. Check assay, dissolution, microbiological results where applicable, test methods and the destination import permit or product registration. A generic GMP statement is not enough.

3. Confirm whether the order ships complete, as a partial shipment, or as a split batch. Do not accept mixed batches without written approval, and require every outer carton to retain a readable batch identity. Confirm whether the agreed Incoterm is EXW, FOB, CIF or DDP, including who pays freight, insurance, duties and destination clearance.

4. At arrival, photograph seals, pallets, labels and damage before opening. Count cartons and tablets, then reconcile batch numbers, expiry dates and quantities against the packing list. Quarantine damaged, wet, tampered or temperature-exposed cartons until investigation.

Record the data logger result when temperature-controlled transport applies, and file the receipt, discrepancy report and release decision for traceability.

Frequently asked questions

  • What details should you include before requesting an imatinib quotation?

    State the disease indication, prescribed dose, 100mg or 400mg strength, imatinib base equivalent, salt form, dosage form, pack size and manufacturer’s product code.

  • How do you define an imatinib wholesale specification?

    Record the strength, indication, salt form, tablet dosage form, pack configuration, manufacturer, product code, required quantity and documentation needed for the transaction.

  • Which supplier and batch checks should you complete in Nagpur?

    Verify the supplier’s business and licence details, then request the batch number, certificate of analysis, manufacturing and expiry dates, packaging details and distribution-control records.

  • Who handles export documents, import duties and customs clearance?

    Assign each responsibility in the purchase order or supply agreement, including export paperwork, freight, import duties, broker fees, permits and destination-country clearance.

  • What should you review before shipment and receiving?

    Confirm the final strength, quantity, batch documents, labels, remaining shelf life, shipping conditions, transport records and receiving procedure before authorising dispatch.

Nov 14th, 2026 11:30 AM